Wireless remote control heating insole

Wireless remote control heating insole

In order to achieve the best use effect, please read the instructions before using the product.

This product material using the newest material ortholite, which has the characteristics of beautiful appearance, insulation, ventilation, comfortable to wear. The internal control system using high frequency double channel RF wireless control, to ensure consistency, stability. Different remote control operation modes also can display real-time actual working state of insole. The heating composite material has characteristics of high heat efficiency, high intensity. The infrared radiation of electrically heating material can promote blood circulation and other health effects. Insole battery using high capacity polymer and high safe cells, which ensure the warming effect and reach the maximum using life at the same time. Due to the use of high strength, high flexibility of composite material as the heating elements, can avoid damaging heated unit of traditional heating insole repeated bending in walking.

Operating instructions:

1) Before using this product, please charge the battery fully. Insert the battery charger, the charger red light, indicates that the battery is charging, The battery is full of electricity when the charger light turns to green light.

2) The battery is full of electricity, press the remote control key for 2 seconds, the remoter 3 LED lights will flash and insole 3 LED lights flash simultaneously, insoles are in the preheating mode. (the preheating mode is whole output mode, it will switch to mid-gear mode automatically 5 minutes later )

3) Press the remote button, then press control switch once, the remote control 3 LED lights flash for 3 seconds, insole 3 LED lights flash for 3 seconds synchronously, it’s working in the high-gear mode.

4) Press control switch once again, remote control 2 LED lights flash for 3 seconds, insole 3 LED lights flash for 3 seconds synchronously, it’s working in the mid-gear mode.

5) Then press control switch once again, remote control 1 LED light flashes for 3 seconds, insole 1 LED light flashes for 3 seconds synchronously, it’s working in low gear mode. According to the control switch, repeatedly stall cycle.

6) Long press control switch for 2 seconds, remote LED light off, insoles LED light off synchronously, it indicates that the insole power off and stop working.

Note:

If the remote control being lost accidentally , the control switch next to insole charging socket is also available, which has the same functions as the remote control.

Heating parameters:

After preheating,the temperature reach up to 55-60°C. High gear can reach to 50°C, the heat preservation time is about 4-5 hours. The median gear temperature is 45°C, the heat preservation time is about 6-7 hours. Low gear can reach to 40°C, the heat preservation time is about 9-10 hours.

Electrical parameters:

Battery voltage: 3.7V

Battery capacity: 1800mA

Working voltage range: 3.0V-4.2V

Charging voltage: 4.2V

Discharge cut-off voltage: 3.0V

Battery life: 500 cycles or more

Charger parameters:

Charging: constant current and constant voltage (CC/CV)

Charging temperature: 0°C ~ 45°C

Input: AC/100-230V, 40-60Hz

Output: DC/4.2V 500mA*2

product show

PLEASE FEEL EASE TO CONTACT US IF YOU HAVE QUESTIONS.WE WILL BE HAPPY TO GIVE SERVICE

Inquiry or leave a message please fill in the following feedback form, we received after the form in 1-3 working days give you an answer, please be sure to fill in your true contact way!

Your Name:	* (Required)
E-Mail:	* (Required)
Tel:	*  (Required)
Code:	(Can't see clearly, click chang)
Content:	(Required)